-
by Nicholas Evans
Included Parts
Items Needed
Necessary Tools
Building the Slice
Pro Micro Firmware
Separate Boards
Diodes
(RGB) 510 Ohm Resistors
(RGB) 0.1uF Cap...
-
by Nicholas Evans
QMK Toolbox
One of the great things about about self-made keyboards is customizing your firmware the way you like. This article will introduce the ...
-
by Nicholas Evans
OLED will need their pins replaced with the low profile pins provided. Here is an easy way of accomplishing this: Pics to come You'll need.
Solder...
右と左の矢印を使ってスライドショーをナビゲートするか、モバイルデバイスを使用している場合は左右にスワイプします
